Instructions for using a 38mm thick fiberglass grating panel - China FRP Grating, FRP Profiles, Grating Clips Suppliers, Manufacturers, Factory - Sino Composite Structures Co.,Ltd.
Personalizzare le preferenze di consenso

Utilizziamo i cookie per aiutarvi a navigare in modo efficiente e a svolgere determinate funzioni. Di seguito troverete informazioni dettagliate su tutti i cookie per ogni categoria di consenso.

I cookie classificati come "Necessari" vengono memorizzati sul browser dell'utente in quanto essenziali per abilitare le funzionalità di base del sito. ... 

Sempre attivo

I cookie necessari sono richiesti per abilitare le funzioni di base di questo sito, come ad esempio il log-in sicuro o la regolazione delle preferenze di consenso. Questi cookie non memorizzano alcun dato di identificazione personale.

I cookie funzionali aiutano a svolgere determinate funzionalità, come la condivisione dei contenuti del sito web sulle piattaforme dei social media, la raccolta di feedback e altre funzioni di terze parti.

I cookie analitici sono utilizzati per capire come i visitatori interagiscono con il sito web. Questi cookie aiutano a fornire informazioni su parametri quali il numero di visitatori, la frequenza di rimbalzo, la fonte di traffico, ecc.

I cookie di prestazione sono utilizzati per comprendere e analizzare gli indici di prestazione chiave del sito web, che aiutano a fornire una migliore esperienza utente ai visitatori.

I cookie pubblicitari vengono utilizzati per fornire ai visitatori annunci pubblicitari personalizzati in base alle pagine visitate in precedenza e per analizzare l'efficacia delle campagne pubblicitarie.

Sino Composite Structures Co.,Ltd.

+86-510-86890852

WhatsApp: 8618921275456

Sino Composite Structures Co.,Ltd.

+86-510-86890852

WhatsApp: 8618921275456

Cerca
Chiudere questa casella di ricerca.

Istruzioni per l'utilizzo di un pannello grigliato in vetroresina di 38 mm di spessore

Casa " Prodotti " Istruzioni per l'utilizzo di un pannello grigliato in vetroresina di 38 mm di spessore

Istruzioni per l'utilizzo di un pannello grigliato in vetroresina di 38 mm di spessore

In general, the most commonly used specification for fiberglass grating is a hole spacing of 38 * 38, and the thickness of the grating with such hole spacing is 25mm, 30mm, and 38mm, respectively. Here, the editor will explain the usage instructions for fiberglass grating panels with a thickness of 38mm.

FRP Grating
Griglia in FRP

The single grid size of fiberglass grating with a thickness of 38mm is generally 38X38mm. The commonly used whole panel sizes are 1X4.04m, 1.22X3.66m, and 1.22X2.44m. Its upper auxiliary width is 6.5mm and lower auxiliary width is 5mm, with a weight of approximately 12kg/square meter. It is generally used in places where the load-bearing requirements are not high. Compared with other thicknesses of grating, its load-bearing capacity is relatively low, with a load-bearing range of about 3-4 tons.

We can see its presence in the following situations:
1. Municipal greening tree pool, tree pit cover plate
Tree pool cover plate is a fiberglass grating used to lay tree pits. The common names for tree pool cover plates are tree grates, tree fences, tree pool cover plates, etc., and their names vary due to local dialects. The specifications of the tree pond cover plate are generally 38 * 38 * 38 (unit: mm), and the overall size of the tree pond cover plate is mainly 1220 * 3660 and 1220 * 4000. Different sizes of tree pits require different sizes, and installation personnel can cut them according to their needs.


2. Cover plate for drainage ditch with only people
Due to the average load-bearing capacity of the 38mm thick fiberglass grating, it is necessary to pay attention to the width and inner diameter of the trench not exceeding 30cm when applying it to the trench cover, and it is only suitable for people to walk and cannot pass heavy objects such as vehicles.

FRP Grating
38mm fiberglass grating

3. Factory walkway board inspection channel floor cargo rack
Due to its good corrosion resistance, fiberglass grating with a thickness of 38mm can be used as pedestrian walkway boards, workshop inspection channels, and floor cargo racks in places with severe corrosion such as water treatment plants and electroplating plants.


4. Solar photovoltaic power generation pedal photovoltaic roof walkway board
Photovoltaic power generation pedals generally use 38mm thick fiberglass grilles with bright and long-lasting colors. A suitable amount of anti UV agent is added to the raw materials, which will not fade even under direct sunlight. It also has the characteristics of corrosion resistance, acid and alkali resistance, and is not afraid of wind and sun exposure. It is lightweight and flame-retardant.
The above is a summary of the load-bearing capacity and applicable scope of 38mm thick fiberglass grating by the editor. After reading this article, have you gained some understanding of fiberglass grating.

Pannello grigliato in fibra di vetro
Potrebbe piacerti anche

Notizie

Prodotto caldo

it_ITIT