News - Sino Composite Structures Co.,Ltd.

38mm 두께의 유리 섬유 격자 패널 사용 지침

2025-02-06

In general, the most commonly used specification for fiberglass grating is a hole spacing of 38 * 38, and the thickness of the grating with such hole spacing is 25mm, 30mm, and 38mm, respectively. Here, the editor will explain the usage instructions for fiberglass grating panels with a thickness of 38mm. FRP Grating The single grid size of fiberglass grating with a thickness of 38mm is generally 38X38mm. The commonly used whole panel sizes are 1X4.04m, 1.22X3.66m, and 1.22X2.44m. Its upper auxiliary width is 6.5mm and lower auxiliary width is 5mm, with a weight of approximately 12kg/square meter. It is generally used in places where the load-bearing requirements are not high. Compared with other thicknesses of grating, its load-bearing capacity is relatively low, with a load-bearing range of about 3-4 tons. We can see its presence in the following situations:1. Municipal greening tree pool, tree pit cover plateTree pool cover plate is a fiberglass grating used to lay tree pits. The common names for tree pool cover plates are tree grates, tree fences, tree pool cover plates, etc., and their names vary due to local dialects. The specifications of the tree pond cover plate are generally 38 * 38 *

더 읽기"

유리 섬유 격자의 자동화된 생산은 개발의 새로운 트렌드가 되었습니다.

2025-02-06

At present, the production process of fiberglass grating is basically completed manually, which has low production efficiency, high labor intensity, and uneven fiberglass after manual labor, directly affecting the quality of the product. Automated production of fiberglass grating has become a new trend in development. FRP Grating Fiberglass grating is a type of plate-shaped material with many spaces, which is reinforced with glass fiber and made of unsaturated polyester resin as the matrix through special processing and composite. Fiberglass grating can be used as a structural material for floors, trench covers, platforms, ship decks, stairs, walkways, etc. in corrosive environments.To achieve automated production of fiberglass grating, a fiberglass grating automated production equipment is needed, which has been applied by some manufacturers. It includes a truss, a fiberglass grating mold set below the truss, and a laying device that reciprocates along the X-axis and Y-axis directions on the truss. The laying device corresponds to the fiberglass grating mold. Automated production of fiberglass grating Development direction of fiberglass grating:1. The large-scale and integrated production of fiberglass grilles: Large cooling towers, chimneys, wind turbine blades, large-diameter fiberglass pipelines, and other products reflect the characteristics of large-scale production in the fiberglass industry. The scale

더 읽기"

유리 섬유 격자 패널 생산을 위한 표면 처리 공정

2025-01-23

When the fiberglass grating board is just out of the furnace, its appearance does not have a lubricated and clean luster, and it needs to be processed to achieve the expected effect.The quality of the fiberglass formed parts used in the production of fiberglass grating machines has a significant impact on the appearance of the products and is also closely related to the degree of lubrication. In addition to the quality of these materials, what is important is the overall skill nature of the mold’s quality and service life. However, domestically produced fiberglass molds are a good structure, but compared to other industrialized countries, the appearance quality of the products is poor, as well as the lack of mold materials, manufacturing equipment and conditions. More importantly, most domestic manufacturers do not attach great importance to these details as some foreign factories do, and mainly rely on experience in precision machining of the mold surface. The appearance processing technology of fiberglass molds is introduced as follows:1. Water grinding method – innovation of new or old modes, water sandpaper is used for water grinding. Water sandpaper is used at the starting point of water grinding, usually from 600. Some users, in order

더 읽기"

FRP 그레이팅으로 안전성 강화: 미끄럼 방지 표면 등

2024-12-10

Fiber Reinforced Polymer (FRP) grating has emerged as a robust solution for enhancing safety in various environments. Its non-slip properties, combined with its durability, corrosion resistance, and ease of installation, make it an ideal choice for many industrial and commercial applications. This paper explores the benefits of FRP grating beyond just providing slip-resistant surfaces, highlighting its role in improving safety standards across different sectors. 1. Introduction to FRP Grating Fiber Reinforced Polymer (FRP) grating is a composite material made from a polymer matrix reinforced with fibers, typically glass, carbon, or aramid fibers. The resulting product combines the lightweight characteristics of plastics with the strength and rigidity of metal. FRP grating can be molded into various shapes and sizes, making it adaptable to numerous applications where traditional materials like steel might not be suitable due to weight, corrosion, or conductivity concerns. 2. Non-Slip Surface Properties One of the most significant advantages of FRP grating is its inherent non-slip surface, which provides excellent traction even under wet conditions. This property is particularly valuable in areas prone to water accumulation, such as marine environments, chemical plants, and food processing facilities. Unlike metal gratings that can become dangerously slick when wet, FRP grating maintains

더 읽기"